Sidekick Frames

Trello list: Resources Trello card: https://trello.com/c/5WIw9VNS/71-sidekick

Checklist item from Trello card "Sidekick updates".

Checklist item from Trello card "Sidekick updates".

Checklist item from Trello card "Sidekick updates".

Checklist item from Trello card "Sidekick updates".

Checklist item from Trello card "Sidekick updates".

Checklist item from Trello card "Sidekick updates".

Trello list: Upcoming Trello card: https://trello.com/c/FkIWsUVS/52-sidekick-updates

Add top plate battery strap reliefs, the current placement causes the strap to hit the FC. If the top plate were split into 4ths… add strap notches to the 1/4th and 4/4th positions (where as

In order for me to understand if Daniel Defense makes financial sense, I need to know our cost on all of the metal parts, for our current revisions. Please give me the cost on the single “thi

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

Checklist item from Trello card "Final DTC Restock".

The gemfan folding props are highly desired, and I have validated they won’t just explode with a payload and actually log cleaner gyro noise than APC’s and tune well. However, the first fligh

# Summary We are building a folding frame for Auterion. The folding aspect will be the same architecture as the sidekick. The difference will be that the body is designed for Auterion’s elec

###### Current Totals - 105 - SK8 - 30 - DC10 - 30 - SK7 - 30 - 5” arm sets (4 x 30arms) - spare parts listed below in original ### ORIGINAL --- New order for 100 sidekick 8” frames Spar

In order to get our final inventory out we are going to do some bundling and extra marketing with our last bit of inventory. It’s not a going out of business sale or everything on clearance b

Checklist item from Trello card "DC10 frame".

Frame that carries one of 3 specific radios. 10” prop size One-way birds (don’t need to be crash resistant) Design priority’s - light (the lighter it is, the more they can carry or the fart

The antenna mount hits the FC STACK the way they build it. Change the print to be as low profile as possible, we’ll run a wood/self tapping screen to hold it in. Extend the mounts on the top

Checklist item from Trello card "Sidekick V1.2 updates".

Checklist item from Trello card "Sidekick V1.2 updates".

Checklist item from Trello card "Sidekick V1.2 updates".

payload guy says where we placed the mount holes is where the wire passthrough holes are. Suggested we move the pressnuts/mount holes farther out (blue circles), AND to carve out the passthro

attach the invoice we paid for the sidekick 8’s that just got delivered so I can invoice it Trello list: Done (move completed cards here) Trello card: https://trello.com/c/whNoSjOs/64-invoi

Checklist item from Trello card "DC10 Final tweaks".

Checklist item from Trello card "DC10 Final tweaks".

DC10 was highly accepted, loved everything about it. Customer will be going through their process to get budget approval. ‌ Changes requested: 1 - antenna mounts that fold down so that ant

the sidekick has a tail print to house either an SMA pigtail, or dual walksnail antennas. They’d like the antenna sleeves to extend farther up another 3/4”. Maintain everything else (the sli

Checklist item from Trello card "Target ship date for additional 8" arms (for 8 sets/drones)".

Checklist item from Trello card "Target ship date for additional 8" arms (for 8 sets/drones)".

Checklist item from Trello card "Target ship date for additional 8" arms (for 8 sets/drones)".

Checklist item from Trello card "Target ship date for additional 8" arms (for 8 sets/drones)".

Checklist item from Trello card "Target ship date for additional 8" arms (for 8 sets/drones)".

We have a direct request from \*\*\*\* to evaluate the 8” folding frame. We need an extra 8 sets (for 8 drones) of 8” arms. We agreed, that this batch will be the original off the shelf, thin

We are trying scrambling to get drones ready for drone dominance, and need to figure out resource allocation (Jason’s contemplating additional resources on this depending on when we can expec

Checklist item from Trello card "CAD Files for all metal parts (sidekick)".

One of the companies from the acquisition is Daniel Defense. There’s a request to somewhat secure and add value to producing all of the metal parts on the folding frame. There may be an oppor

3d print mods as per Jon on the SMA mount Trello list: Done (move completed cards here) Trello card: https://trello.com/c/zZ1li0Xg/41-sma-mount-modifications-jon

Using the holes in the middle of the top plate, design a 3d print that will hold an immortal-T TBS crossfire 900hz antenna By the way, we need to design this ASAP so FOCUS ON SOMETHING THAT

Create a mounting plate for the sUPI integration. Document has been sent via signal (do not upload that document to Trello or anywhere public as it is confidential/sensitive information). Let